1.方案簡介
本方案采用Heartbeat雙機熱備軟件來保證數據庫的高穩定性和連續性,數據的一致性由DRBD這個工具來保證。默認情況下只有一臺mysql在工作,當主mysql服務器出現問題后,系統將自動切換到備機上繼續提供服務,當主數據庫修復完畢,又將服務切回繼續由主mysql提供服務。
2.方案優缺點
優點:安全性高、穩定性高、可用性高,出現故障自動切換。
缺點:只有一臺服務器提供服務,成本相對較高,不方便擴展,可能會發生腦裂。
3.軟件介紹
Heartbeat介紹
官方站點:http://linux-ha.org/wiki/Main_Page
heartbeat可以資源(VIP地址及程序服務)從一臺有故障的服務器快速的轉移到另一臺正常的服務器提供服務,heartbeat和keepalived相似,heartbeat可以實現failover功能,但不能實現對后端的健康檢查
DRBD介紹
官方站點:http://www.drbd.org/
DRBD(DistributedReplicatedBlockDevice)是一個基于塊設備級別在遠程服務器直接同步和鏡像數據的軟件,用軟件實現的、無共享的、服務器之間鏡像塊設備內容的存儲復制解決方案。它可以實現在網絡中兩臺服務器之間基于塊設備級別的實時鏡像或同步復制(兩臺服務器都寫入成功)/異步復制(本地服務器寫入成功),相當于網絡的RAID1,由于是基于塊設備(磁盤,LVM邏輯卷),在文件系統的底層,所以數據復制要比cp命令更快。DRBD已經被MySQL官方寫入文檔手冊作為推薦的高可用的方案之一
4.方案拓?fù)?/strong>
5.方案適用場景:
適用于數據庫訪問量不太大,短期內訪問量增長不會太快,對數據庫可用性要求非常高的場景。
6.測試環境介紹(如下所示,均已關閉防火墻及selinux,生產環境自行開放端口)
主機名 ip 系統 DRBD磁盤 heartbeat版本db-server-01 192.168.0.10 centos6.2 64bit /dev/sda5 3.0.4db-server-02 192.168.0.20 centos6.2 64bit /dev/sda5 3.0.4
7.軟件安裝以及環境配置
(1)安裝drbd依賴組件(兩臺機器,安裝以后重啟系統,因?yàn)闀墐?nèi)核版本,不重啟會對不上內核版本,有知道不用重啟的童鞋請給我留言^_^):
yum install -y kernel kernel-devel kernel-headers flex
(2)下載軟件安裝(兩臺機器操作一樣)
wget http://oss.linbit.com/drbd/8.4/drbd-8.4.2.tar.gz
tar xf drbd-8.4.2.tar.gz cd drbd-8.4.2./configure --prefix=/usr/local/drbd --with-kmmake KDIR=/usr/src/kernels/2.6.32-431.11.2.el6.x86_64/ #很多童鞋無法加載drbd模塊,多半是正在運行的內核版本和新安裝的不相符make installmkdir -p /usr/local/drbd/var/run/drbdcp /usr/local/drbd/etc/rc.d/init.d/drbd /etc/rc.d/init.dchmod 755 /etc/init.d/drbdcd drbdmake cleanmake KDIR=/usr/src/kernels/2.6.32-431.11.2.el6.x86_64/cp drbd.ko /lib/modules/`uname -r`/kernel/lib/modprobe drbd
檢查是否加載了drbd模塊
[root@192.168.0.10 ~]# lsmod | grep drbddrbd 314246 0 libcrc32c 1246 1 drbd[root@192.168.0.10 ~]#
(3)DRBD配置(配置之前需要先使用fdisk對 /dev/sda進行分區)
[root@192.168.0.10 ~]# df -HTFilesystem Type Size Used Avail Use% Mounted on/dev/sda2 ext4 19G 2.6G 16G 15% /tmpfs tmpfs 121M 0 121M 0% /dev/shm/dev/sda1 ext4 204M 52M 141M 27% /boot/dev/sda5 ext4 34G 185M 32G 1% /data[root@192.168.0.10 ~]#
我這里兩臺機器之前都已經分區了,由于是自己筆記本上的虛擬機,所以懶得加磁盤了,我直接把 /data/卸載,然后格式化/dev/sda5,我兩臺機器都這樣操作,如果你有空的磁盤,照樣需要進行分區,比如可以將一個1T的盤分一個區就行了。
[root@192.168.0.10 ~]# umount /data/ [root@192.168.0.10 ~]# mkfs.ext4 /dev/sda5mke2fs 1.41.12 (17-May-2010)Filesystem label=OS type: LinuxBlock size=4096 (log=2)Fragment size=4096 (log=2)Stride=0 blocks, Stripe width=0 blocks2048000 inodes, 8185344 blocks409267 blocks (5.00%) reserved for the super userFirst data block=0Maximum filesystem blocks=4294967296250 block groups32768 blocks per group, 32768 fragments per group8192 inodes per groupSuperblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624Writing inode tables: done Creating journal (32768 blocks): doneWriting superblocks and filesystem accounting information: doneThis filesystem will be automatically checked every 28 mounts or180 days, whichever comes first. Use tune2fs -c or -i to override.[root@192.168.0.10 ~]#
[root@192.168.0.10 ~]# fdisk -lDisk /dev/sda: 53.7 GB, 53687091200 bytes255 heads, 63 sectors/track, 6527 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x000eb0ff Device Boot Start End Blocks Id System/dev/sda1 * 1 26 204800 83 LinuxPartition 1 does not end on cylinder boundary./dev/sda2 26 2321 18432000 83 Linux/dev/sda3 2321 2451 1048576 82 Linux swap / Solaris/dev/sda4 2451 6528 32742400 5 Extended/dev/sda5 2451 6528 32741376 83 Linux[root@192.168.0.10 ~]#
我這里還要在/etc/fstab里面注釋一項:
#UUID=33958004-e8a7-4135-844f-707a5537e86a /data ext4 defaults 1 2
否則重啟機器的時候提示無法掛載,會無法啟動的。
修改/etc/hosts文件,兩臺服務器操作一樣。
192.168.0.10 db-server-01192.168.0.20 db-server-02
drbd配置只需要修改/usr/local/drbd/etc/drbd.d/global_common.conf配置文件即可,修改后如下(兩臺服務器配置一樣):
[root@192.168.0.10 ~]# cat /usr/local/drbd/etc/drbd.d/global_common.confglobal { usage-count yes; }common { syncer { rate 30M; } } #同步速率,視帶寬而定 resource r0 { #創建一個資源,名字叫"r0" protocol C; #選擇的是drbd的C 協議(數據同步協議,C為收到數據并寫入后返回,確認成功) startup { } disk { on-io-error detach; } net { } on db-server-01 { #設定一個節點,分別以各自的主機名命名 device /dev/drbd0; #設定資源設備/dev/drbd0 指向?qū)嶋H的物理分區 /dev/sda5 disk /dev/sda5; address 192.168.0.10:7888; #設定監聽地址以及端口 meta-disk internal; } on db-server-02 { device /dev/drbd0; disk /dev/sda5; address 192.168.0.20:7888; meta-disk internal; #internal表示是在同一個局域網內 }}[root@192.168.0.10 ~]#
(4)DRBD的管理與維護:
創建DRBD資源
配置好drbd以后,就需要使用命令創建配置的drbd資源,使用如下命令(兩臺服務器操作一樣):
[root@192.168.0.10 ~]# dd if=/dev/zero of=/dev/sda5 bs=1M count=100 #不這樣做的話,在創建資源的時候報錯100+0 records in100+0 records out104857600 bytes (105 MB) copied, 3.34339 s, 31.4 MB/s[root@192.168.0.10 ~]#
[root@192.168.0.10 ~]# drbdadm create-md r0 Writing meta data...initializing activity logNOT initializing bitmapNew drbd meta data block successfully created.success[root@192.168.0.10 ~]#
(5)DRBD的啟動與狀態查看(分別在兩臺服務器啟動)
[root@192.168.0.10 ~]# /etc/init.d/drbd start Starting DRBD resources: [ create res: r0 prepare disk: r0 adjust disk: r0 adjust net: r0].....[root@192.168.0.10 ~]#
[root@192.168.0.20 ~]# /etc/init.d/drbd startStarting DRBD resources: [ create res: r0 prepare disk: r0 adjust disk: r0 adjust net: r0].[root@192.168.0.20 ~]#
查看drbd的狀態:
[root@192.168.0.10 ~]# /etc/init.d/drbd statusdrbd driver loaded OK; device status:version: 8.4.2 (api:1/proto:86-101)GIT-hash: 7ad5f850d711223713d6dcadc3dd48860321070c build by root@db-server-01, 2014-04-18 21:15:57m:res cs ro ds p mounted fstype0:r0 Connected Secondary/Secondary Inconsistent/Inconsistent C[root@192.168.0.10 ~]#
可以看見都還沒有主節點。設置當前節點(192.168.0.10)為主節點,并進行格式化和掛載 。
drbdadm -- --overwrite-data-of-peer primary allmkfs.ext4 /dev/drbd0mkdir /datamount /dev/drbd0 /data/
在另外一臺服務器創建掛載目錄,也創建/data
[root@192.168.0.20 ~]# mkdir /data
查看一下drbd的狀態(可以看見還在同步):
[root@192.168.0.10 ~]# /etc/init.d/drbd statusdrbd driver loaded OK; device status:version: 8.4.2 (api:1/proto:86-101)GIT-hash: 7ad5f850d711223713d6dcadc3dd48860321070c build by root@db-server-01, 2014-04-18 21:15:57m:res cs ro ds p mounted fstype... sync'ed: 13.7% (27596/31972)M0:r0 SyncSource Primary/Secondary UpToDate/Inconsistent C /data ext4[root@192.168.0.10 ~]#
(6)mysql安裝,我這里為了簡單直接安裝編譯好的二進制軟件包(兩臺服務器都需要安裝,操作一樣,只是第二臺mysql不需要初始化數據)
注意:兩臺服務器上的mysql用戶的uid和gid要一樣。不然切換后會導致mysql數據目錄的屬主不正確而啟動失敗。
[root@192.168.0.10 ~]# wget http://cdn.mysql.com/Downloads/MySQL-5.5/mysql-5.5.37-linux2.6-x86_64.tar.gz
[root@192.168.0.10 ~]# tar xf mysql-5.5.37-linux2.6-x86_64.tar.gz -C /usr/local/[root@192.168.0.10 ~]# cd /usr/local/[root@192.168.0.10 local]# ln -s mysql-5.5.37-linux2.6-x86_64/ mysql[root@192.168.0.10 local]# groupadd mysql[root@192.168.0.10 local]# useradd -r -g mysql mysql[root@192.168.0.10 local]# cd mysql[root@192.168.0.10 mysql]# chown -R mysql .[root@192.168.0.10 mysql]# chgrp -R mysql .[root@192.168.0.10 mysql]# mkdir /data/mysql[root@192.168.0.10 mysql]# chown -R mysql.mysql /data/mysql/[root@192.168.0.10 mysql]# /usr/local/mysql/scripts/mysql_install_db --user=mysql --datadir=/data/mysql/ --basedir=/usr/local/mysql
[root@192.168.0.10 mysql]# chown -R root .[root@192.168.0.10 mysql]# cp support-files/my-medium.cnf /etc/my.cnf[root@192.168.0.10 mysql]# cp support-files/mysql.server /etc/init.d/mysqld[root@192.168.0.10 mysql]# chmod 755 /etc/init.d/mysqld
[root@192.168.0.10 mysql]# egrep 'datadir|basedir' /etc/my.cnf #兩臺服務器上的mysql配置文件都加入這里的配置 datadir=/data/mysqlbasedir=/usr/local/mysql [root@192.168.0.10 mysql]#
(7)手動切換drbd的主從。看另外一臺服務器是否有數據(自動切換需要使用heartbeat,后面介紹):
[root@192.168.0.10 ~]# ll /data/total 20drwx------ 2 root root 16384 Apr 18 22:16 lost+founddrwxr-xr-x 5 mysql mysql 4096 Apr 18 23:01 mysql[root@192.168.0.10 ~]#
[root@192.168.0.20 ~]# ll /data/total 0[root@192.168.0.20 ~]#
[root@192.168.0.10 ~]# /etc/init.d/drbd statusdrbd driver loaded OK; device status:version: 8.4.2 (api:1/proto:86-101)GIT-hash: 7ad5f850d711223713d6dcadc3dd48860321070c build by root@db-server-01, 2014-04-18 21:15:57m:res cs ro ds p mounted fstype0:r0 Connected Primary/Secondary UpToDate/UpToDate C /data ext4[root@192.168.0.10 ~]#
可以看見當前服務器是主,也就是數據在這臺服務器上,另外一臺服務器是沒有數據的。下面進行手動切換
主切換成從,需要先卸載文件系統,再執行降級為從的命令:
[root@192.168.0.10 ~]# umount /data/[root@192.168.0.10 ~]# drbdadm secondary all
從切換成主,要先執行升級成主的命令然后掛在文件系統:
[root@192.168.0.20 ~]# drbdadm primary all[root@192.168.0.20 ~]# mount /dev/drbd0 /data/[root@192.168.0.20 ~]# ll /data/total 20drwx------ 2 root root 16384 Apr 18 22:16 lost+founddrwxr-xr-x 5 mysql mysql 4096 Apr 18 23:01 mysql[root@192.168.0.20 ~]# /etc/init.d/drbd statusdrbd driver loaded OK; device status:version: 8.4.2 (api:1/proto:86-101)GIT-hash: 7ad5f850d711223713d6dcadc3dd48860321070c build by root@db-server-02, 2014-04-18 21:22:55m:res cs ro ds p mounted fstype0:r0 Connected Primary/Secondary UpToDate/UpToDate C /data ext4[root@192.168.0.20 ~]#
可以看見已經成功切換成主,并且mysql初始化數據也存在了。
DRBD腦裂后的處理
當DRBD出現腦裂后,會導致drbd兩邊的磁盤數據不一致,在確定要作為從的節點上切換成secondary,并放棄該資源的數據:
drbdadm secondary r0drbdadm -- --discard-my-data connect r0
在要作為primary的節點重新連接secondary(如果這個節點當前的連接狀態為WFConnection的話,可以省略),使用如下命令連接:
drbdadm connect r0
(8)Heartbeat安裝(兩臺服務器)
需要添加epel源,centos默認自己沒有該軟件包,當然你可以自己源碼編譯。
rpm -ivh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
yum install heartbeat -y
創建DRBD腳本文件drbddisk:(兩臺服務器)
注意:
此處是一個大坑,因?yàn)槟J(rèn)yum安裝Heartbeat,不會在/etc/ha.d/resource.d/創建drbddisk腳本,估計是版本太新了吧。記得前兩年都不會這樣的。囧。而且也無法在安裝后從本地其他路徑找到該文件。此處也是因?yàn)閱親eartbeat后無法PING通虛IP,最后通過查看/var/log/ha-log日志,找到一行ERROR: Cannot locate resource script drbddisk,然后進而到/etc/ha.d/resource.d/路徑下發現竟然沒有drbddisk腳本,最后在google上找到該代碼,創建該腳本,終于測試通過:
[root@192.168.0.20 ~]# chmod 755 /etc/ha.d/resource.d/drbddisk [root@192.168.0.20 ~]# cat /etc/ha.d/resource.d/drbddisk #!/bin/bash## This script is inteded to be used as resource script by heartbeat## Copright 2003-2008 LINBIT Information Technologies# Philipp Reisner, Lars Ellenberg####DEFAULTFILE="/etc/default/drbd"DRBDADM="/sbin/drbdadm"if [ -f $DEFAULTFILE ]; then . $DEFAULTFILEfiif [ "$#" -eq 2 ]; then RES="$1" CMD="$2"else RES="all" CMD="$1"fi## EXIT CODES# since this is a "legacy heartbeat R1 resource agent" script,# exit codes actually do not matter that much as long as we conform to# http://wiki.linux-ha.org/HeartbeatResourceAgent# but it does not hurt to conform to lsb init-script exit codes,# where we can.# http://refspecs.linux-foundation.org/LSB_3.1.0/#LSB-Core-generic/LSB-Core-generic/iniscrptact.html####drbd_set_role_from_proc_drbd(){local outif ! test -e /proc/drbd; thenROLE="Unconfigured"returnfidev=$( $DRBDADM sh-dev $RES )minor=${dev#/dev/drbd}if [[ $minor = *[!0-9]* ]] ; then# sh-minor is only supported since drbd 8.3.1minor=$( $DRBDADM sh-minor $RES )fiif [[ -z $minor ]] || [[ $minor = *[!0-9]* ]] ; thenROLE=Unknownreturnfiif out=$(sed -ne "/^ *$minor: cs:/ { s/:/ /g; p; q; }" /proc/drbd); thenset -- $outROLE=${5%/**}: ${ROLE:=Unconfigured} # if it does not show upelseROLE=Unknownfi}case "$CMD" in start)# try several times, in case heartbeat deadtime# was smaller than drbd ping timetry=6while true; do$DRBDADM primary $RES && breaklet "--try" || exit 1 # LSB generic errorsleep 1done;; stop)# heartbeat (haresources mode) will retry failed stop# for a number of times in addition to this internal retry.try=3while true; do$DRBDADM secondary $RES && break# We used to lie here, and pretend success for anything != 11,# to avoid the reboot on failed stop recovery for "simple# config errors" and such. But that is incorrect.# Don't lie to your cluster manager.# And don't do config errors...let --try || exit 1 # LSB generic errorsleep 1done;; status)if [ "$RES" = "all" ]; then echo "A resource name is required for status inquiries." exit 10fiST=$( $DRBDADM role $RES )ROLE=${ST%/**}case $ROLE inPrimary|Secondary|Unconfigured)# expected;;*)# unexpected. whatever...# If we are unsure about the state of a resource, we need to# report it as possibly running, so heartbeat can, after failed# stop, do a recovery by reboot.# drbdsetup may fail for obscure reasons, e.g. if /var/lock/ is# suddenly readonly. So we retry by parsing /proc/drbd.drbd_set_role_from_proc_drbdesaccase $ROLE inPrimary)echo "running (Primary)"exit 0 # LSB status "service is OK";;Secondary|Unconfigured)echo "stopped ($ROLE)"exit 3 # LSB status "service is not running";;*)# NOTE the "running" in below message.# this is a "heartbeat" resource script,# the exit code is _ignored_.echo "cannot determine status, may be running ($ROLE)"exit 4 # LSB status "service status is unknown";;esac;; *)echo "Usage: drbddisk [resource] {start|stop|status}"exit 1;;esacexit 0[root@192.168.0.20 ~]#
(9)heartbeat配置
Hearbeat的配置主要包括三個配置文件,authkeys,ha.cf和haresources的配置,下面就分別來看看:
Authkerys的配置(兩臺服務器配置一樣)
這個文件用來配置密碼認證方式,支持3種認證方式,crc,md5和sha1,從左到右安全性越來越高,消耗的資源也越多。因此如果heartbeat運行在安全的網路之上,比如私網,那么可以將驗證方式設置成crc,master和backup的authkeys配置一樣。我的authkeys文件配置如下:
[root@192.168.0.10 ~]# cat /etc/ha.d/authkeys auth 11 crc[root@192.168.0.10 ~]# chmod 600 /etc/ha.d/authkeys
注意:該文件權限必須是600
ha.cf的配置(兩臺機器稍微有點區別),Primary(192.168.0.10)如下:
[root@192.168.0.10 ~]# cat /etc/ha.d/ha.cf logfile /var/log/ha-log #定義Heartbeat的日志名字及位置 logfacility local0 keepalive 2 #設定心跳(監測)時間為2秒 deadtime 15 #設定死亡時間為15秒 ucast eth1 192.168.0.20#采用單播的方式,IP地址指定為對方IP auto_failback off #當Primary機器發生故障切換到Secondary機器后Primary恢復后是否進行切回操作 (最好是我們有需求手動進行切換)node db-server-01node db-server-02[root@192.168.0.10 ~]#
Secondary(192.168.0.20)如下:
[root@192.168.0.20 ~]# cat /etc/ha.d/ha.cf logfile /var/log/ha-log #定義Heartbeat的日志名字及位置 logfacility local0 keepalive 2 #設定心跳(監測)時間為2秒 deadtime 15 #設定死亡時間為15秒 ucast eth1 192.168.0.10#采用單播的方式,IP地址指定為對方IP auto_failback off#當Primary機器發生故障切換到Secondary機器后Primary恢復后是否進行切回操作(一般我們可以看需求,否則不用自動切換) node db-server-01node db-server-02[root@192.168.0.20 ~]#
haresources的配置(兩臺機器配置一樣):
[root@192.168.0.10 ~]# cat /etc/ha.d/haresources db-server-01 IPaddr::192.168.0.88/24/eth1 drbddisk::r0 Filesystem::/dev/drbd0::/data::ext4 mysqld [root@192.168.0.10 ~]#
注:該文件內IPaddr,Filesystem等腳本存放路徑在/etc/ha.d/resource.d/下,也可在該目錄下存放服務啟動腳本(例如:mysqld),將相同腳本名稱添到/etc/ha.d/haresources內容中,從而跟隨heartbeat啟動而啟動該腳本。
IPaddr::192.168.0.88/24/eth1:用IPaddr腳本配置浮動VIP
drbddisk::r0:用drbddisk腳本實現DRBD主從節點資源組的掛載和卸載
Filesystem::/dev/drbd0::/data::ext4:用Filesystem腳本實現磁盤掛載和卸載
(10)heartbeat的管理
配置好heartbeat之后,需要將mysql從自啟動服務器中去掉,因?yàn)橹?span lang="EN-US">heartbeat啟動的時候會掛載drdb文件系統以及啟動mysql,切換的時候會將主上的mysql停止并卸載文件系統,從上會掛載文件系統,并啟動mysql。因此需要做如下操作(兩臺服務器):
[root@192.168.0.10 ~]# chkconfig mysqld off[root@192.168.0.10 ~]# chkconfig heartbeat off[root@192.168.0.10 ~]# chkconfig drbd off
[root@192.168.0.10 ~]# cat /etc/rc.local #!/bin/sh## This script will be executed *after* all the other init scripts.# You can put your own initialization stuff in here if you don't# want to do the full Sys V style init stuff.touch /var/lock/subsys/localmodprobe drbd #必須先加載模塊,這也是因?yàn)閷用罘旁谶@里的原因/etc/init.d/drbd start/etc/init.d/heartbeat start[root@192.168.0.10 ~]#
到這里heartbeat+drbd+mysql高可用環境就搭建結束了。接下來進行測試。
高可用測試
(1)在第一臺服務器上面啟動mysql服務。(192.168.0.10)
[root@192.168.0.10 ~]# /etc/init.d/mysqld startStarting MySQL.The server quit without updating PID file (/[FAILED]ql/db-server-01.pid).[root@192.168.0.10 ~]# ll /data/total 0[root@192.168.0.10 ~]#
怎么回事?/data/下面為空。這里是因?yàn)槲覀冊谇懊嬉呀?jīng)把這個節點變?yōu)镾econdary
[root@192.168.0.10 ~]# /etc/init.d/drbd statusdrbd driver loaded OK; device status:version: 8.4.2 (api:1/proto:86-101)GIT-hash: 7ad5f850d711223713d6dcadc3dd48860321070c build by root@db-server-01, 2014-04-18 21:15:57m:res cs ro ds p mounted fstype0:r0 Connected Secondary/Primary UpToDate/UpToDate C[root@192.168.0.10 ~]#
我們現在需要手動切換回來。才能啟動mysql
[root@192.168.0.20 ~]# umount /data/[root@192.168.0.20 ~]# drbdadm secondary all[root@192.168.0.20 ~]#
[root@192.168.0.10 ~]# drbdadm primary all[root@192.168.0.10 ~]# mount /dev/drbd0 /data/[root@192.168.0.10 ~]# ll /data/total 20drwx------ 2 root root 16384 Apr 18 22:16 lost+founddrwxr-xr-x 5 mysql mysql 4096 Apr 18 23:01 mysql[root@192.168.0.10 ~]# /etc/init.d/drbd statusdrbd driver loaded OK; device status:version: 8.4.2 (api:1/proto:86-101)GIT-hash: 7ad5f850d711223713d6dcadc3dd48860321070c build by root@db-server-01, 2014-04-18 21:15:57m:res cs ro ds p mounted fstype0:r0 Connected Primary/Secondary UpToDate/UpToDate C /data ext4[root@192.168.0.10 ~]#
可以看見已經切換回來了,我們現在可以啟動mysql了。
[root@192.168.0.10 ~]# /etc/init.d/mysqld start Starting MySQL....... [ OK ][root@192.168.0.10 ~]# mysqlWelcome to the MySQL monitor. Commands end with ; or \g.Your MySQL connection id is 1Server version: 5.5.37-log MySQL Community Server (GPL)Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.Oracle is a registered trademark of Oracle Corporation and/or itsaffiliates. Other names may be trademarks of their respectiveowners.Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.mysql>
(2)在兩臺服務器上面啟動heartbeat
[root@192.168.0.10 ~]# /etc/init.d/heartbeat startStarting High-Availability services: INFO: Resource is stoppedDone.[root@192.168.0.10 ~]#
[root@192.168.0.20 ~]# /etc/init.d/heartbeat startStarting High-Availability services: INFO: Resource is stoppedDone.[root@192.168.0.20 ~]#
[root@192.168.0.10 ~]# ip addr | grep eth13: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 inet 192.168.0.10/24 brd 192.168.0.255 scope global eth1 inet 192.168.0.88/24 brd 192.168.0.255 scope global secondary eth1[root@192.168.0.10 ~]#
可以看見虛擬ip192.168.0.88已經存在了。說明成功了。我們看看heartbeat的日志就能發現。
[root@192.168.0.10 ~]# tail -n 20 /var/log/ha-log harc(default)[5598]: 2014/04/19_00:25:21 info: Running /etc/ha.d//rc.d/status statusApr 19 00:25:22 db-server-01 heartbeat: [5591]: info: Comm_now_up(): updating status to activeApr 19 00:25:22 db-server-01 heartbeat: [5591]: info: Local status now set to: 'active'Apr 19 00:25:22 db-server-01 heartbeat: [5591]: info: Status update for node db-server-02: status activeharc(default)[5618]: 2014/04/19_00:25:22 info: Running /etc/ha.d//rc.d/status statusApr 19 00:25:33 db-server-01 heartbeat: [5591]: info: remote resource transition completed.Apr 19 00:25:33 db-server-01 heartbeat: [5591]: info: remote resource transition completed.Apr 19 00:25:33 db-server-01 heartbeat: [5591]: info: Initial resource acquisition complete (T_RESOURCES(us))/usr/lib/ocf/resource.d//heartbeat/IPaddr(IPaddr_192.168.0.88)[5671]: 2014/04/19_00:25:33 INFO: Resource is stoppedApr 19 00:25:33 db-server-01 heartbeat: [5635]: info: Local Resource acquisition completed.harc(default)[5752]: 2014/04/19_00:25:33 info: Running /etc/ha.d//rc.d/ip-request-resp ip-request-respip-request-resp(default)[5752]: 2014/04/19_00:25:33 received ip-request-resp IPaddr::192.168.0.88/24/eth1 OK yesResourceManager(default)[5775]: 2014/04/19_00:25:33 info: Acquiring resource group: db-server-01 IPaddr::192.168.0.88/24/eth1 drbddisk::r0 Filesystem::/dev/drbd0::/data::ext4 mysqld/usr/lib/ocf/resource.d//heartbeat/IPaddr(IPaddr_192.168.0.88)[5803]: 2014/04/19_00:25:33 INFO: Resource is stoppedResourceManager(default)[5775]: 2014/04/19_00:25:33 info: Running /etc/ha.d/resource.d/IPaddr 192.168.0.88/24/eth1 startIPaddr(IPaddr_192.168.0.88)[5926]: 2014/04/19_00:25:34 INFO: Adding inet address 192.168.0.88/24 with broadcast address 192.168.0.255 to device eth1IPaddr(IPaddr_192.168.0.88)[5926]: 2014/04/19_00:25:34 INFO: Bringing device eth1 upIPaddr(IPaddr_192.168.0.88)[5926]: 2014/04/19_00:25:34 INFO: /usr/libexec/heartbeat/send_arp -i 200 -r 5 -p /var/run/resource-agents/send_arp-192.168.0.88 eth1 192.168.0.88 auto not_used not_used/usr/lib/ocf/resource.d//heartbeat/IPaddr(IPaddr_192.168.0.88)[5900]: 2014/04/19_00:25:34 INFO: Success/usr/lib/ocf/resource.d//heartbeat/Filesystem(Filesystem_/dev/drbd0)[6030]: 2014/04/19_00:25:34 INFO: Running OK[root@192.168.0.10 ~]#
激動的時刻到了,我們測試一下自動切換。我們先看看兩臺服務器的狀態:
[root@192.168.0.10 ~]# df -HTFilesystem Type Size Used Avail Use% Mounted on/dev/sda2 ext4 19G 3.5G 15G 20% /tmpfs tmpfs 121M 0 121M 0% /dev/shm/dev/sda1 ext4 204M 52M 141M 27% /boot/dev/drbd0 ext4 33G 216M 32G 1% /data[root@192.168.0.10 ~]#
[root@192.168.0.20 ~]# df -HTFilesystem Type Size Used Avail Use% Mounted on/dev/sda2 ext4 19G 4.9G 13G 28% /tmpfs tmpfs 121M 0 121M 0% /dev/shm/dev/sda1 ext4 204M 52M 141M 27% /boot[root@192.168.0.20 ~]#
可以看見掛載在第一臺服務器。
測試方法:
1.停掉master上的mysqld,看看是否切換(因?yàn)閔eartheat不檢查服務的可用性,因此需要通過而外的腳本來實現)。
2.停掉master的heartheat看看是否能正常切換。
3.停掉master的網絡或者直接將master系統shutdown,看看能否正常切換。
4.啟動master的heartbeat看看是否能正常切換回來。
5.重新啟動master看看能否切換過程是否OK。
注意:這里說的切換是不是已經將mysql停掉、是否卸載了文件系統等等。
我就停止master(192.168.0.10)上的heartbeat來測試是否會自動切換,這里除了第一條無法實現,其他的都可以切換:
[root@192.168.0.10 ~]# /etc/init.d/heartbeat stopStopping High-Availability services: Done.
[root@192.168.0.10 ~]# df -HTFilesystem Type Size Used Avail Use% Mounted on/dev/sda2 ext4 19G 3.5G 15G 20% /tmpfs tmpfs 121M 0 121M 0% /dev/shm/dev/sda1 ext4 204M 52M 141M 27% /boot[root@192.168.0.10 ~]# /etc/init.d/drbd statusdrbd driver loaded OK; device status:version: 8.4.2 (api:1/proto:86-101)GIT-hash: 7ad5f850d711223713d6dcadc3dd48860321070c build by root@db-server-01, 2014-04-18 21:15:57m:res cs ro ds p mounted fstype0:r0 Connected Secondary/Primary UpToDate/UpToDate C[root@192.168.0.10 ~]#
可以看見已經切換了,我們看另外一臺機器的情況:
[root@192.168.0.20 ~]# df -HTFilesystem Type Size Used Avail Use% Mounted on/dev/sda2 ext4 19G 4.9G 13G 28% /tmpfs tmpfs 121M 0 121M 0% /dev/shm/dev/sda1 ext4 204M 52M 141M 27% /boot/dev/drbd0 ext4 33G 216M 32G 1% /data[root@192.168.0.20 ~]# netstat -nltp | grep 3306 | grep -v greptcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 5542/mysqld [root@192.168.0.20 ~]#
可以發現已經切換過來,mysql也自動啟動了。之前是沒有啟動的。
[root@192.168.0.20 ~]# ip addr | grep eth13: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 inet 192.168.0.20/24 brd 192.168.0.255 scope global eth1 inet 192.168.0.88/24 brd 192.168.0.255 scope global secondary eth1[root@192.168.0.20 ~]# mysqlWelcome to the MySQL monitor. Commands end with ; or \g.Your MySQL connection id is 1Server version: 5.5.37-log MySQL Community Server (GPL)Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.Oracle is a registered trademark of Oracle Corporation and/or itsaffiliates. Other names may be trademarks of their respectiveowners.Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.mysql>
可以看見,一切正常呢。如果我們查看日志,就可以看見到底發生了什么。
[root@192.168.0.20 ~]# tail -n 10 /var/log/ha-log ResourceManager(default)[4768]: 2014/04/19_00:36:42 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd0 /data ext4 startFilesystem(Filesystem_/dev/drbd0)[5131]: 2014/04/19_00:36:42 INFO: Running start for /dev/drbd0 on /data/usr/lib/ocf/resource.d//heartbeat/Filesystem(Filesystem_/dev/drbd0)[5122]: 2014/04/19_00:36:42 INFO: SuccessResourceManager(default)[4768]: 2014/04/19_00:36:43 info: Running /etc/init.d/mysqld startmach_down(default)[4741]: 2014/04/19_00:36:46 info: /usr/share/heartbeat/mach_down: nice_failback: foreign resources acquiredmach_down(default)[4741]: 2014/04/19_00:36:46 info: mach_down takeover complete for node db-server-01.Apr 19 00:36:46 db-server-02 heartbeat: [4637]: info: mach_down takeover complete.Apr 19 00:36:58 db-server-02 heartbeat: [4637]: WARN: node db-server-01: is deadApr 19 00:36:58 db-server-02 heartbeat: [4637]: info: Dead node db-server-01 gave up resources.Apr 19 00:36:58 db-server-02 heartbeat: [4637]: info: Link db-server-01:eth1 dead.[root@192.168.0.20 ~]#
對于mysqld服務掛掉的情況無法實現自動切換,所以需要一個腳本來幫助我們完成,我這里有個簡單的腳本,能實現當mysqld服務不可用時進行自動切換,當進行切換時發送郵件等。該腳本放在主服務器執行,也就是運行mysqld服務的服務器上執行。
[root@192.168.0.20 ~]# cat mysqlmon.sh #!/bin/bashtrap 'echo PROGRAM INTERRUPTED; exit 1' INTusername=rootpassword=123456n=0log='/var/log/mysqlmon.log'while truedo if /usr/local/mysql/bin/mysql -u${username} -p${password} -e "use test" >&/dev/null then echo `date +"%Y-%m-%d %H:%M:%S"` mysqld is alive! >> ${log} n=0 else echo "`date +"%Y-%m-%d %H:%M:%S"` mysqld cannot be connected!" >> ${log} n=$[n + 1] if [ $n -eq 3 ] then /etc/init.d/heartbeat stop echo "`date +"%Y-%m-%d %H:%M:%S"` mysqld switched to backup!" >> ${log} echo "`date +"%Y-%m-%d %H:%M:%S"` mysqld switched to backup" | mutt -s "mysqld switched to backup" saltstack@163.com break fi fi sleep 10done[root@192.168.0.20 ~]#
掛在后臺執行:
[root@192.168.0.10 ~]# nohup mysqlmon.sh &
停止mysqld服務,看是否進行切換以及發送郵件:
[root@192.168.0.10 ~]# /etc/init.d/mysqld stopShutting down MySQL. [ OK ][root@192.168.0.10 ~]#
[root@192.168.0.20 ~]# df -HTFilesystem Type Size Used Avail Use% Mounted on/dev/sda2 ext4 19G 4.9G 13G 28% /tmpfs tmpfs 121M 0 121M 0% /dev/shm/dev/sda1 ext4 204M 52M 141M 27% /boot/dev/drbd0 ext4 33G 216M 32G 1% /data[root@192.168.0.20 ~]# netstat -nltp | grep 3306tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 13771/mysqld [root@192.168.0.20 ~]#
總結:
搭建還不算復雜,但是也踩了不少坑,比如yum安裝的heartbeat沒有drbddisk腳本。該方案的優點是安全性高、穩定性高、可用性高,出現故障自動切換,但是缺點也很明顯,只有一臺服務器提供服務,成本相對較高。不方便擴展。可能會發生腦裂。當mysql服務掛掉或者不可用的情況下不能進行自動切換,需要通過crm模式實現或者額外的腳本實現(比如shell腳本監測到master的mysql不可用就將主上的heartbeat停掉,這樣就會切換到backup中去)。監控也特別重要,可以使用nagios或者zabbix監控。
參考資料:
聯系客服